Plunger Pump Demonstration Unit

Description

• A small-scale plunger pump demonstration unit, comprising of a water reservoir, pump, control valve, relief valve and interconnecting pipe work, all mounted on a stainless steel base.
• Includes both a sprung loading valve and a needle valve for loading the pump.
• Equipped with electronic measurement sensors for cylinder pressure, plunger position, pump outlet pressure and cumulative flow.
• Pulsation damping facility.
• Transparent pump head for visibility.
• Capable of being linked to a PC (not supplied) via an interface console (an essential accessory).
• Supplied with software providing full instructions for setting up, operating, calibrating and performing the teaching exercises. Facilities provided for logging, processing and displaying data graphically.
• Full theoretical back-up included together with a student questions and answers session.

Capabilities:

• Measurement during each pump cycle of:

1. plunger displacement
2. cylinder pressure pump outlet pressure
3. pump outlet pressure

• On-line P-V diagram displays
• Measurement of volumetric efficiency
• Measuring the effect on pump performance of:

1.  sprung loading valve or needle valve adjusting the outlet loading valve
2. adjusting the outlet loading valve the inclusion of a pulsation damper vessel
3. the inclusion of a pulsation damper vessel

Technical Specification:

• Max flow rate: 0.725 l/m typical
• Max head: 4 bar
• Swept volume: 15mm stroke x 32mm diameter
• Pumping speed: variable up to 60 strokes/minute
• Motor power rating: 250W